Ciro® Street Glide & Road Glide Frame Mounted Adjustable Highway Peg Mounts

Installation Instructions

Models with aftermarket headers or floorboard spacers:

Some aftermarket exhausts use floorboard spacers. If you have aftermarket exhaust check the right side floorboard mounts. If they have spacers installed you will need one more to install the Ciro Frame Mounted HWY Peg Mounts. You might also need a longer bolt (3/8-16) to go with the spacer. The spacer and bolt can be found at most hardware stores or from your exhaust manufacturer. The additional spacer is needed because the Ciro design uses one more bolt than the stock front floorboard mount.  Please feel free to contact RickRak if you have any questions 704-215-7989

Please note: We have found that some Harley-Davidson Defiance Rider Floorboards (P/N 50500640) will have to be lightly modified on the bottom side of the board to work. The Harley-Davidson Empire Rider Footboard p/n 50501932 & 50501933 they will have limited arm adjustments back toward the driver. 

• Key Features
  • Fully adjustable
  • Replaces factory front floorboard mount, no drilling or modifications needed for installation
  • Work with or without engine guards
  • Mounts to factory bolt locations
  • NO DRILLING REQUIRED
  • Standard (4″ long center to center) or extended length available (5-1/2″ long center to center)
  • Please note: We have found that some H-D Defiance Rider Floorboards (P/N 50500640) will have to be lightly modified on the bottom side of the board to work with Ciro Frame Mounted Adjustable Highway Pegs. Please feel free to contact us for more details. 
  • Will not work with Harley-Davidson Empire Rider Footboard p/n 50501932 &  50501933 kits.
  • Some aftermarket exhausts use floorboard spacers. If you have aftermarket exhaust check the right side floorboard mounts. If they have spacers installed you will need one more to install the Ciro Frame Mounted HWY Peg Mounts. You might also need a longer bolt (3/8-16) to go with the spacer. The spacer and bolt can be found at most hardware stores or from your exhaust manufacturer. The additional spacer is needed because the Ciro design uses one more bolt than the stock front floorboard mount. Please feel free to contact Ciro if you have any questions 715-808-0027.
• Finish
  Black or Chrome
• Location
  Driver
• Mounting Hardware Included
  Yes
• Included With Kit
  • Left mount
  • Right mount
  • Extension arm (2) (4″ arm with standard or 5-1/2″ arm with extended)
  • Female clevis mount (2)
  • Installation hardware kit

  Will not fit on the 2024 CVO Road Glide with factory mini floorboards or models equipped with H-D Switchback Mini Floorboard  (P/N 50502668 or 50502669)

• Drilling Required
  No
• Est. Install Time
  90 Minutes
• Instructions

  Click Here

• Drag Specialties Cross Reference
  • 60101: 1620-2664
  • 60121: 1620-2665
  • 60601: 1620-2666
  • 60621: 1620-2667